Products

MAL25X50 Mini Round Small Cylinder Small Pneumatic

Model:
MAL25X50
Brand:
YUMO
MOQ:
10 Pcs
Place of Origin:
China
Usage:
industry
Type:
Buffer Spacer
Working Environment Temperature:
0~70 ℃
Motion Pattern:
Double Action or Single Action

Mini Pneumatic Air Cylinder MAL25x50 New Automation Equipment Accessories Piston Compact Pneumatic Air Cylinder

Specification

Bore size: 20 25 32 40
Acting type: MSAL/MTAL: Single Acting
Other: Double Acting
Fluid: Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Single Acting: 0.2~1.0MPa(28~145psi)(1.0~10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(℃): -20~70
Speed rang (mm/s): Double Acting: 30~800      Single Acting:50~800
Stroke tolerance: 0~150(0~+1.0) >150(0~+1.4)
Cushion Type: Bumper
Port Size: PT1/8 PT1/4

① PT thread, NPT thread and G thread are available.

Stroke

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
MAL 20 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 1000
25 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 1000
32 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 1500
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 1500
MALD
MALJ
20 25 50 75 80 100 125 150 160 175 200 250 300 300 -
25 25 50 75 80 100 125 150 160 175 200 250 300 300 -
32 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 -
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 -
MSAL 20 25 50 75 100 125 150 150 -
25 25 50 75 100 125 150 150 -
32 25 50 75 100 125 150 150 -
40 25 50 75 100 125 150 150 -
MTAL 20 25 50 75 100 100 -
25 25 50 75 100 100 -
32 25 50 75 100 100 -
40 25 50 75 100 100  

Product Feature

1.Manufactured by our enterprise.

2.Front and back cover and cylinder tube are connected by threads.

3.Piston adopts heterogeneous two-way seal structure. It has compact size and has the function of grease reservation.

4.Front cover adopts self-lubrication bearing guide that has good performance of lubrication and guide.

5.There are several modes of back cover, which makes the installation of cylinder more convenient.

6.There are cylinders and mounting accessories with several specifications for your choice.

Installation & Usage

1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.